RADIO STATION ACCESSORIES

AUDIO MIXER BRM 3000

AUDIO MIXER BRM 3000

The standard audio mixer BRM 3000 has an internal modular structure, designed for radio broadcast studios in order to meet the main needs of a professional station. Its multiplexed inputs, master outputs and telephone hybrids make this audio mixer a must for all those studios wishing to have all the services inherent to this sector at a really low cost.

STEREO GENERATOR & AUDIO PROCESSOR - COM LIM 20

COM-LIM 20

The COM LIM 20 audio processor is the combination of a professional digital stereo generator (with more than 60dB channel separation), a high-dynamic adjusted limiter with stop band rejection bigger than 90dB above 75KHz and a 4-band equalizer. All these advanced characteristics provide a whole range of professional features really useful in all radio studios. This audio processor manufactured by OMB also includes a RDS/RBDS digital encoder and an optional digital audio input.

STEREO GENERATOR & AUDIO PROCESSOR - COM LIM 50

COM LIM 50

The COM LIM 50 audio processor is the combination of a professional digital stereo generator (with more than 65dB channel separation), a high-dynamic adjusted limiter with stop band rejection bigger than 90dB above 75KHz and a 5-band equalizer. All these advanced characteristics provide a whole range of professional features really useful in all radio studios. This audio processor manufactured by OMB also includes a RDS/RBDS digital encoder and an optional digital audio input.

TRANSIENT SUPPRESSOR

The transient suppressor is conceived to protect all the radio equipments connected to the mains (against power over-voltages) and it also iincludes additional protection against indirect contact. This system is fitted with high-speed A/D converters and microprocessor circuits continuously sampling the measured signals and making successive approach calculations, obtaining in this way a true r.m.s. value for the given signal, a relevant fact to perform accurate measurements in distorted waveforms without decreasing the measurements' precision.

TELEMETRY SYSTEM - REM EXC DIG

TELEMETRY SYSTEM - REM EXC DIG

The OMB Telemetry System allows to manage, to monitorize and to control all parameters of your equipments using the Simple Network Management Protocol (SNMP) and Webserver. SNMP is becoming one of the most used protocols for managing telecommunications networks.
 

 
 
 

AUTOMATIC SWITCHING SYSTEM - ATS

The ATS is a microcontroller-based system which monitors the correct operation of the main transmitter and automatically switches to the back-up transmitter if it detects any failure in the main transmitter's operation. Directional couplers at RF level are used for failure detection and its configuration is fully programable by users: 0dB power level, intervention threshold, transmitter switching time, automatic or manual operation mode, and hot or cold standby.

The equipment can be supplied with two different possibilities:

200W CAVITY FILTER

200W CAVITY FILTER

The OMB band-pass filter operates in band II (87.5–108MHz) and its standard configuration is 2 cavities. The main features of this band-pass filter are its low loss, its high isolation and its natural convection. With this filter users get a transmission without distortion.

800W CAVITY FILTER

800W CAVITY FILTER

The OMB band-pass filter operates in band II (87.5–108MHz) and its standard configuration is 2 cavities. The main features of this band-pass filter are its low loss, its high isolation and its natural convection. With this filter users get a transmission without distortion.

2KW CAVITY FILTER

2KW CAVITY FILTER

The OMB band-pass filter operates in band II (87.5–108MHz) and its standard configuration is 2 cavities. The main features of this band-pass filter are its low loss, its high isolation and its natural convection. With this filter users get a transmission without distortion.

 

 

3KW CAVITY FILTER

3KW CAVITY FILTER

The OMB band-pass filter operates in band II (87.5–108MHz) and its standard configuration is 2 cavities. The main features of this band-pass filter are its low loss, its high isolation and its natural convection. With this filter users get a transmission without distortion.